Friction Savers
This cambium saver is constructed of nylon webbing and has an Hardcoat anodized aluminum ring on each end.
Rated at 5000 lbs.
This cambium saver is constructed of nylon webbing and has an Hardcoat anodized aluminum ring on each end.
Rated at 5000 lbs.
This economical rope and cambium saver from Weaver Leather is still a favorite among many arborists. Made of tough leather, it's lightweight and quicker and simpler to deploy than other friction saving devices. Designed for use on ropes less than 5/8" in diameter.
This cambium saver is constructed of nylon webbing and has an Hardcoat anodized aluminum ring on each end.
Rated at 5000 lbs.
The cambium saver can be used as a redirect or false crotch if your climbing requires a position where there is no limb to hang your line over. It can be installed and removed from the ground.
This cambium saver is constructed of nylon webbing and has an Hardcoat anodized aluminum ring on each end.
Rated at 5000 lbs.
This new version of the fall protection pulleySAVER from Teufelberger retains most of the original design except with an added acccesory called the equaLIZA. The equaLIZA is to be used as an equalizing link if the pulleySAVER is used on two anchorage points.
The climbing rope moves along the TEUFELBERGER pulleySAVER extremely easily on the PINTO pulley while the resilient eye which facilitates the retrieval of the pulleySAVER easily returns into its original position even after a thousand cycles.
The attachment as anchor point on a tree can be implemented in four different configurations, depending on the specific application: as swinging element in a double leg configuration, as choke hitch, wound around in a double leg configuration, or narrowed in a double leg configuration.
Length: 8' (2.5m)
This new version of the fall protection pulleySAVER from Teufelberger retains most of the original design except with an added acccesory called the equaLIZA. The equaLIZA is to be used as an equalizing link if the pulleySAVER is used on two anchorage points.
The climbing rope moves along the pulleySAVER extremely easily on the PINTO pulley while the resilient eye which facilitates the retrieval of the pulleySAVER easily returns into its original position even after a thousand cycles.
The attachment as anchor point on a tree can be implemented in four different configurations, depending on the specific application: as swinging element in a double leg configuration, as choke hitch, wound around in a double leg configuration, or narrowed in a double leg configuration.
Length: 4 Meters (13 feet)
FEATURES:
• Different colored aluminum rings and dual-colored webbing allow quick and easy rigging and removal from the ground
• Wide webbing prevents the cambium saver from twisting
• Large and small eyelets for ropes with spliced ends (splice is attached to the small eyelet)
• Ring diameter large ring (inside / outside): 40 / 64 mm
• Ring diameter small ring (inside / outside): 28 / 53 mm
• Certified to EN 354 and EN795 B
FEATURES:
• Different colored aluminum rings and dual-colored webbing allow quick and easy rigging and removal from the ground
• Wide webbing prevents the cambium saver from twisting
• Large and small eyelets for ropes with spliced ends (splice is attached to the small eyelet)
• Ring diameter large ring (inside / outside): 40 / 64 mm
• Ring diameter small ring (inside / outside): 28 / 53 mm
• Certified to EN 354 and EN795 B
The TREESBEE anchor strap is used to improve rope glide at the anchor while protecting the tree from abrasion. It is designed for ropes with spliced terminations (the splice goes through the small ring). The galvanized steel rings provide great durability. Three year warranty. Also available in 43" length. S190414-92.
FEATURES:
Friction saver designed to facilitate movement within the tree:
- Protects the tree and improves rope glide at the anchor
- Possible to install and retrieve from the ground
- Wide, rigid webbing limits twisting
- Strap with large and small diameter rings for ropes with spliced terminations (the splice goes through the small ring)
- Triple thickness of termination on large ring side makes the webbing more rigid for retrieval
- Two-person use is possible when performing a rescue
- Galvanized steel ring for greater durability:
- Large ring diameter (interior/exterior): 46/70 mm
- Small ring diameter (interior/exterior): 28/52 mm
- Compatible with 30 mm retrieval ball
The TREESBEE anchor strap is used to improve rope glide at the anchor while protecting the tree from abrasion. It is designed for ropes with spliced terminations (the splice goes through the small ring). The galvanized steel rings provide great durability. Three year warranty. Also available in 35" length. S190414-91.
FEATURES:
Friction saver designed to facilitate movement within the tree:
- Protects the tree and improves rope glide at the anchor
- Possible to install and retrieve from the ground
- Wide, rigid webbing limits twisting
- Strap with large and small diameter rings for ropes with spliced terminations (the splice goes through the small ring)
- Triple thickness of termination on large ring side makes the webbing more rigid for retrieval
- Two-person use is possible when performing a rescue
- Galvanized steel ring for greater durability:
- Large ring diameter (interior/exterior): 46/70 mm
- Small ring diameter (interior/exterior): 28/52 mm
- Compatible with 30 mm retrieval ball
Adjustable friction saver allows the work rope to be set up without harming the tree: - Strap has four different adjustment positions to adapt to different branch diameters.
- Special design helps protect the tree
- Comes with 1.5 m replaceable, high-visibility yellow strap that can be connected to another 1.5 or 2.5 m strap to lengthen the friction saver and enable work on larger trees
- Easy to install the rope and clip it into the MINO accessory carabiner for retrieval
- Recommended for use on doubled rope (DdRT/MRS); the system may also be used on a single rope (SRT/SRS)
Optimal efficiency:
- The integrated high-efficiency pulley optimizes rope glide at the anchor
- Two-person use is possible for carrying out a rescue
System is easily retrievable from the ground:
- 21 mm black retrieval ball, specially designed for the NAJA friction saver, for easy retrieval from the ground
- Once the rope has passed through the pulley, the system can be retrieved when the retrieval ball becomes blocked in the MINO accessory carabiner
- Strap and slots are slim to reduce the risk of getting the friction saver stuck in the tree
The NAJA friction saver allows the user to work in compliance with the ANSI Z133 standard
.jpg)
.jpg)