Tree Support Systems
Warning: Before any ground anchor installation determine that the anchor locations will not be close to any underground electrical cables, water lines, or sewer pipes. Failure to determine the location of electrical cables may result in serious injury.
We offer three types of metal tree support systems.
1. The HELIX GROUND ANCHOR is a steel rod with a helix end that installs in the ground much like a woodscrew. Available in five sizes with holding power from 200-4,000 lbs. Use for anchoring trees, equipment, and even buildings to the ground.
(**Helix Anchor Installation Tips: Dig a hole to a depth of approximately 1/2 the length of the anchor at a slight angle. After the hole is dug turn the anchor into the ground either by hand or by using a rod or length of pipe for leverage. After the anchor is installed, repack the earth six inches at a time and tamp down.**)
2. DUCKBILL anchors, a patented labor and time saving device, work like a toggle bolt in soil. DUCKBILLS are driven into the ground (with no holes, no digging and no concrete), providing a safe and environmentally sensitive installation. An upward pull on the anchor tendon rotates the DUCKBILL into a perpendicular "anchor lock" position in undisturbed soil. The result: superb holding capacities.DUCKBILL anchor systems offer the most effective, lightweight and economical solutions to any anchoring application, large or small.
3. The TOMAHAWK Tree Stabilization and Fertilization System is a below ground tree stabilization system that is easily installed. It features holes for fertilizing and simplifies deep root watering.
Helix anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level. Anchor eyelets are always weld closed.
Model No #: | #315 |
Holding Power in Normal Soil | 200 lbs |
Length: | 15 inch |
Shipping Weight: | 1.25 lbs. |
Size | 3" helix |
Helix anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level. Anchor eyelets are always weld closed.
Model No | #330 |
Holding Power in Normal Soil | 1400 lbs |
Length | 30 inch |
Shipping Weight | 2.5 |
Size | 3" helix |
Helix anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level. Anchor eyelets are always weld closed.
Model No# | #430 |
Holding Power in Normal Soil: | 2500 lbs |
Length | 30 inch |
Shipping Weight: | 3 lb. |
Size | 4" helix |
All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level. Anchor eyelets are always weld closed.
Model No : | #404 |
Holding Power in Normal Soil: | 3000 lbs |
Length: | 40 inch |
Shipping Weight: | 4.3 lbs. |
Size: | 4" helix |
Helix anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level. Anchor eyelets are always weld closed.
Model No# | #648 |
Holding Power in Normal Soil | 4000 lbs |
Length | 48 inch |
Rod Diameter | 5/8 in. |
Shipping Weight | 4 lbs. |
Size | 6" helix |
The Tomahawk System 42 is a below ground tree stabilizing and fertilization system. Two Tomahawks are used per tree unless noted otherwise. 10 Tomahawks per case. For trees up to 5" caliper.
FEATURES:
- No more above ground hazards or obstacles.
- Easy Maintenance.
- Notched for guying in extreme wind.
- Holes for fertilizing.
- Simplifies deep root watering.
- Promotes trunk growth.
- No hose, clamps, wire or twine needed.
- Easy & Quick to install.
- Reuse once tree takes root. (approx six months) - but no removal is necessary.
The Tomahawk System 42 is a below ground tree stabilizing and fertilization system. Two Tomahawks are used per tree unless noted otherwise. Sold as a single unit. 2 stakes are required for each tree. For trees up to 5" caliper. Also available in case of 10. A010300-42
FEATURES:
- No more above ground hazards or obstacles.
- Easy Maintenance.
- Notched for guying in extreme wind.
- Holes for fertilizing.
- Simplifies deep root watering.
- Promotes trunk growth.
- No hose, clamps, wire or twine needed.
- Easy & Quick to install.
- Reuse once tree takes root. (approx six months) - but no removal is necessary.