Micro Pulleys
All micro-pulleys meet a minimum tensile strength of 5,000 lbs. to satisfy ANSI safety standards.
The DMM Hitch Climber Pulley combines a compact rigging plate with a high-efficiency pulley to excel in friction-hitch climbing systems. Organize carabiners, ascend, descend, or rig it for rescue or hauling. This pulley has three separate attachment points and can accommodate up to 14mm ropes.
DDM Hitchclimber PDF Information Flyer
• Watch the Hitch Climber set-up video here:
• Hot forged side plates for maximum strength and durability
• Highly efficient sealed ball bearings
• Stout side plates to better tend hitches
• Riveted and tamperproof assembly
• Well suited for MRS climbing systems, lanyards, and more
Compare to the DMM Hitchclimber.
• Hot forged side plates for maximum strength and durability
• Highly efficient sealed ball bearings
• Stout side plates to better tend hitches
• Riveted and tamperproof assembly
• Well suited for MRS climbing systems, lanyards, and more
Compare to the DMM Hitchclimber.
The new geometry offers greater efficiency combined with a striking aesthetic. The ‘pushing plates’ will advance your friction hitch earlier and the optimized fair lead flairs direct rope towards the sheave when tending slack.
Also features a large sheave with an efficient roller bearing and a stainless steel axle.
CMI Model RP110 Rescue block with purple anodized aluminum sideplates, 1 1/4" aluminum sheave, bushing, and stainless steel axle.
CMI RP110D Micro Double Rescue Pulley with double sheave purple anodized aluminum sideplates, two 1 1/4" aluminum sheaves, bushing, and aluminum axle.
LIGHT, COMPACT AND VERSATILE is a new micro-pulley from Climbing Technology of Italy with mobile side plates that allow the insertion of any connector.
- Made of polished light alloy with mobile side plates that allow the insertion of any connector.
- Sheave mounted on self-lubricating bushings.
- For use with ropes 11-13 mm (1/2")
- Designed for hauling system and deviations load.
Light-weight, high strength aluminum 1/2" micro pulley from ISC with moveable side plates. Rated at 36kn.
| Maximum Rope Size : | 1/2 in. |
| Size : | 3 x 2.2 in. |
| Shipping Weight : | 0.5 lbs |
| Tensile Strength : | 8,000 lbs. |
| Work Load : | 1,600 lbs. |
The DMM Pinto Pulley features hot forged aluminium side plates to provide strength and durability. Heat treated stainless steel spindles for high strength and corrosion resistance. Pre-lubricated sintered bronze bearings for ultra smooth operation.
Recommended for arborist, rescue, hauling and many applications where friction reduction is required. Tensile strength 50kn (11,249 lbs).
Tensile strength= 50kn (11,250 lbs.)
Watch the the DMM Instructional Video below:
The most simple use of the HYDRA pulley is on the rope bridge of the saddle, but it can be used in a variety of advanced ways. The Hydra can be used in ascent systems, lanyard systems, fliplines, or as a redirect. In any configuration, the use of the HYDRA is greatly enhanced by the flexibility to add multiple connections and rotate when needed.
The Notch Rook Pulley from Rock Exotica provides the functionality of a pulley with a rigplate. The swivel top offers three connection points lined with rubber o-rings to grip carabiners tightly. These connection points were specifically designed for the rock-O carabiner to avoid dangerous cross-loading.
The most simple use of the pulley is on the rope bridge of the saddle, but it can be used in a variety of advanced ways. The Hydra can be used in ascent systems, lanyard systems, fliplines, or as a redirect. In any configuration, the use of the ROOK is greatly enhanced by the flexibility to add multiple connections and rotate when needed.
.jpg)
.jpg)