Chain Saw Lanyards
| Shipping Weight : | 0.3 lbs |
| Size : | 13" |
Lanyard keeps the saw attached to the climber to prevent accidental loss when climbing, yet it is long enough to allow complete freedom of movement when cutting and, if the saw is dropped, it falls below the level of the climber's feet.
| Shipping Weight : | 1.3 lbs |
| Size : | 48" |
Designed with a swivel snap fastened to a 4' length of Kernmantle line with a loop which may be hitched to a saw handle by placing ring through loop to form hitch at the other end. The snaps are fastened by means of a swage that will part at 160 lb. pull.
Lanyard keeps the saw attached to the climber to prevent accidental loss when climbing, yet it is long enough to allow complete freedom of movement when cutting and, if the saw is dropped, it falls below the level of the climber's feet
| Shipping Weight : | 1.3 lbs |
| Size : | 48 inches |
Designed with an eye on each end of 4' length of Kernmantle line that may be hitched to a saw handle. The eyes are fastened by means of a swage that will part at 160 lb. pull. The purpose of this lanyard is to keep the saw attached to the climber to prevent accidental loss when climbing, yet it is long enough to allow complete freedom of movement when cutting and, if the saw is dropped, it falls below the level of the climber's feet.
| Shipping Weight : | 1.3 lbs |
| Size : | 48 inches |
| Shipping Weight : | 1.5 lbs |
| Size : | 48 inches |
| Shipping Weight : | 1.3 lb |
The Buckingham Tear-Away Chainsaw lanyard with built-in bungee is designed for safety and convenience. It is constructed with a tear away safety pack that activates when force is applied. This feature eliminates the possibility of the user being pulled out of a tree if the saw gets hung up on a falling limb.
Lanyard is made of elastic and nylon webbing which keeps it short when not in use but allows it to stretch to full arms length when needed. Yellow, 6" nylon loop with twist half hitch attaches to saw handle. 1 1/8" steel ring, 46" length, 1 3/4" diameter steel ring to suspend saw.
| Shipping Weight : | 0.4 lbs |
| Size : | 46 inches |
The ShemBiner from CMI is a light-weight milled aluminum hook that help you attach your chainsaw or other tool to your harness without worrying about locking or unlocking carabiner gates.
Not rated for life support. Made in USA.
Another feature is an extra hole so you can attach a chainsaw lanyard directly to the Shembiner XL, or use it to carry more gear. Made in the USA.
Nylon straps with a half twist help keep equipment hanging straight.
• Constructed of 1" wide double box-stitched nylon webbing with heat-sealed ends to prevent fraying
• 15" length (includes hardware)
• Non-rust manganese bronze 225 snaps are 4-1/4" long.
.jpg)
.jpg)